1. Read the entire message on the display to determine which cover is open. - If the message displayed is "Cover is Open - Close ink cover," go to step 2. - If the message displayed is …

3. Open the machine's front cover. 4. Open the machine's top cover by pressing the blue levers on both sides of the top cover. 5. Pull the paper from inside the machine toward the front of the …

The message 'Please Open Cover' may appear on the display if a page, piece of paper, or paper clip is jammed inside the machine or by improper drum and toner installation.

11. Carefully examine the open area under the flatbed scanner. - Remove any visible paper in this area. 12. Lift the flat bed scanner to release the lock, gently push the scanner support arm …

5. Verify all four drum and toner assemblies are installed correctly: a. Open the top cover until it locks in the open position. b. Remove all four drum and toner assemblies from the machine. …

Any objects stuck in ADF will cause a document jam to occur, so it is important to carefully check for and remove any small pieces of paper or other objects stuck in the ADF. 5. Close the ADF …

5. Close the front cover of the machine and make sure both the left and right sides are closed, especially the left side. 6. If "Cover is Open" still appears on your machine's display, then turn …

1. Press the front cover release button and pull open the front cover. 2. Hold the drum unit's green handle. Pull the drum unit out of the machine until it stops. If you cannot pull the drum unit out, …

To clear the message 'Cover Is Open, Close The Front Cover' from the display, follow the steps listed below: 1. Open the front cover. 2. Remove the drum and toner. NOTE: We recommend …

Message 'Back Cover Open' To clear the message 'Back Cover Open' from the LCD, follow the steps listed below: 1. Turn the Brother machine around with the back of the machine facing …